Unitronic Carbon Fiber Inlet for B9 S4 / S5 3.0TFSI(UH044-INA)Change Vehicle

Description

This Carbon Fiber Turbo Inlet for the B9 and B9.5 Audi S4 and S5 is designed to dramatically improve airflow with massive gains over stock while supporting both the stock turbocharger and hybrid turbochargers via Unitronic's clever 53mm and 65.7mm adapter rings.

Constructed of high quality carbon fiber, this new B9 S4 Turbo Inlet and B9 S5 Turbo Inlet features a large 85mm bore and smooth transitions to draw massive amounts of non-turbulent air from the airbox. A factory style PCV connection is maintained for OEM-level fitment as well.

Learn more in our official release article here.

Features / Benefits

2/2 Twill prepreg carbon fiber weave
Autoclave construction
Up to 57% more airflow than stock
Modular adapter rings (53mm or 65.7mm) for the stock turbocharger or TheTurboEngineers TTE710 / TTE810 hybrid turbochargers
High-quality stainless steel hose clamps
Direct bolt-on fitment with OEM Mounting Locations
Smooth airflow transitions
Proven airflow gains

Hardware Included

Carbon Fiber Turbo Inlet
All Necessary Hardware
Inlet Adapter Ring

Recommended Software

Stage 1
Stage 1+
Stage 2

Related Hardware

$299.99USD

Required Options
You must select one of the following option

Buy Now

Proven Airflow Gains

Unitronic Hardware Engineers carefully benchmarked the OEM Audi S4 & S5 turbo inlet versus the Unitronic Turbo Inlet in a controlled environment using our in-house Superflow SF-1020 flow bench. Our team observed massive air flow gains with the Unitronic Turbo Inlet. This drastic air flow improvement allows the turbocharger to work more efficiently and achieve target boost with less stress resulting in improved reliability.

Designed and Tested In-House

At Unitronic, hardware evolution begins with rapid prototyping utilizing our in-house Stratasys 3D printer. Within hours, Unitronic Engineers are able to have a complete working printed prototype, allowing for test fitments to be performed on the vehicle, functional testing to be completed and flow data collected to further validate the designs.

Install

The Unitronic Carbon Fiber Turbo Inlet for 3.0TFSI EA839 equipped vehicles installs simply with all necessary hardware included. Total installation time can take approximately one to two hours including the removal of the factory turbo inlet.

Difficulty Level:
2 / 5

Installation Guide

UNITRONIC® is a registered trademark of Unitronic Corporation Inc.
© 2024 Unitronic Performance Software and Hardware. All Rights Reserved.
4633 Louis B-Mayer, Laval, Quebec, Canada, H7P 6G5 Tel.: 1.866.341.2447 / Fax: 1.866.714.9893

*Unitronic is not affiliated with any vehicle manufacturers. All Manufacturer and vehicle names and trademarks are used in this web site are for identification purposes only. All trademarks and trade dress such as Audi ®, Volkswagen ®, VW ®, Seat ®, Skoda ®, Porsche ®, Lamborghini® GTI ®, Golf ®,Golf R ®, Golf City ®, Alltrack ®, SportWagen ®, Cupra ®, Scirocco ®, Jetta ®, GLI ®, R32 ®, Rabbit ®, Passat ®, Passat CC ®, Tiguan ®, Beetle ®, New Beetle ®, EOS ®, Touareg ®, Phaeton ® DSG ®, S Tronic ®, TSI ®, TFSI ®, VR6 ®, A1 ®, A3 ®, S3 ®, RS3 ®, Q3 ® , A4 ®, S4 ®, RS4 ®, A5 ®, S5 ®,RS5 ® Q5 ®, SQ5 ®, A6 ®, S6 ®, RS6 ®, Q7 ®, SQ7 ®, A7 ®, S7 ®,RS7 ® A8 ®, S8 ®, R8 ®, TT ®, TTS ®, TTRS ®, Boxster ®, 911 ®, 996 ®, 997 ®, 991 ®, Panamera ®, Macan ®, 918 Spyder ®, Cayenne ®, Cayman ®, Huracan ®, Huracan Performante ® are registered trademarks of Volkswagen AG, Audi AG, and Porsche AG.

Unitronic Corporation Inc. is not affiliated with the Unitronics Group of Companies. To reach Unitronics Group please follow this link https://www.unitronics.com