Unitronic
Toll Free: 1.866.341.2447 My Cart (0)     FR
 
EventsProductsPromotionsAll

NEWS

Stage 3 Performance Software for 2.0TSI GEN3 (non MQB) - Now Available

Oct 08th, 2020 Products
Blog-Stage3-perf-soft-ea888-3-GLI-banner-10-web.jpg

Unitronic® Stage 3 Performance Software is now available for the MK6 GLI and 5C Beetle equipped with the 2.0TSI EA888 GEN 3 (non MQB) (CPLA/CPPA) engine and CTS-TR-2000 Turbo Upgrade Kit. With testing and validations completed, power outputs are increased by +193HP / +145 LB-FT TQ with Unitronic Stage 3 93octane/98ron octane Performance Software to 403 HP / 352 LB-FT. This Performance Software was designed to maximize the limits on the stock fuel system, and thus, does not require any fueling upgrades. Unitronic Stage 2 TCU Software is required for DSG vehicles along with an upgraded Intake, Intercooler and Downpipe to achieve published power figures.


Stage 3 2.0TSI MK6 GLI 5C Beetle




FEATURES

Optimized Responsiveness, Smoothness, Drivability, and Comfort

Unitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration.

Ignition Timing Precisely Calibrated for Higher Octane Fuel

Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.

Optimized Maximum Output

Unitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components.

Factory Safety Limiters Retained

OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability.

Power Delivery Perfectly Optimized Throughout the Power Band

Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.

Speed Governor Removed

Vehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.)

Improved Fuel Efficiency

Optimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions.

Engineered with Strict Industry Standards

With over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.

Extensively Tested Under Various Driving Conditions

Development begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.

Full Staged Software Suite

Includes Stage 3 ECU Tune and all lower Software Stages as well.




AVAILABLE UNITRONIC HARDWARE


Unitronic MK6 2.0 TSI GEN 3 IntakeUnitronic MK6 2.0 TSI GEN 3 IntercoolerUnitronic MK6 2.0 TSI GEN 3 Downpipe


These platforms are supported with Unitronic’s UniCONNECT+ cable, empowering you to tune your vehicle from the comfort of your own home or garage. The cable and associated software allows you to install, and upgrade, your new Unitronic ECU and TCU tunes, flash back to stock file in addition to read and clear DTCs. This is a perfect option for people who like to be autonomous or who don't have a Unitronic Authorized Dealer nearby!

Unitronic UniConnect Plus cable


APPLICATIONS*

2013.5-2018 MK6 GLI 2.0TSI EA888 Gen 3 (CPLA/CPPA)

2014-2017 5C Beetle 2.0TSI EA888 Gen 3 (CPLA/CPPA)

*Subject to ECU/TCU box code availability.


Unitronic Dealer Locator Banner

View mobile version

UNITRONIC® is a registered trademark of Unitronic Corporation Inc.
© 2020 Unitronic Performance Software and Hardware. All Rights Reserved.
4633 Louis B-Mayer, Laval, Quebec, Canada, H7P 6G5 Tel.: 1.866.341.2447 / Fax: 1.866.714.9893
Sema Logo

*Unitronic is not affiliated with any vehicle manufacturers. All Manufacturer and vehicle names and trademarks are used in this web site are for identification purposes only. All trademarks and trade dress such as Audi ®, Volkswagen ®, VW ®, Seat ®, Skoda ®, Porsche ®, GTI ®, Golf ®,Golf R ®, Golf City ®, Alltrack ®, SportWagen ®, Cupra ®, Scirocco ®, Jetta ®, GLI ®, R32 ®, Rabbit ®, Passat ®, Passat CC ®, Tiguan ®, Beetle ®, New Beetle ®, EOS ®, Touareg ®, Phaeton ® DSG ®, S Tronic ®, TSI ®, TFSI ®, VR6 ®, A1 ®, A3 ®, S3 ®, RS3 ®, Q3 ® , A4 ®, S4 ®, RS4 ®, A5 ®, S5 ®,RS5 ® Q5 ®, SQ5 ®, A6 ®, S6 ®, RS6 ®, Q7 ®, SQ7 ®, A7 ®, S7 ®,RS7 ® A8 ®, S8 ®, R8 ®, TT ®, TTS ®, TTRS ®, Boxster ®, 911 ®, 996 ®, 997 ®, 991 ®, Panamera ®, Macan ®, 918 Spyder ®, Cayenne ®, Cayman ® are registered trademarks of Volkswagen AG, Audi AG, and Porsche AG.

Unitronic Corporation Inc. is not affiliated with the Unitronics Group of Companies. To reach Unitronics Group please follow this link https://www.unitronics.com